Alagić Ismar, Lean Six Sigma sa primjenom u praksi, 498 str, : ilustr. ; 25 cm, Biografija autora: str. 457-458., Bibliografija: str. 485-497, ISBN 978-9958-34-601-9. COBISS.BH-ID 47332614, 2022.

(active tab) Title * Alagić Ismar, Rad sa kompjuterski vođenim tehnologijama u CAD/CAM okruženju, ISBN 978-9958-34-599-9, COBISS.BH-ID 47238150, 2022.; Alagić Ismar, Rad sa kompjuterski vođenim tehnologijama u CAD/CAM okruženju, str.346, ilustr.:25;ISBN 978-9958-34-599-9, COBISS.BH-ID 47238150,Planjax Print, Tešanj, 2022.; Alagić Ismar, PROJEKTOVANJE TEHNIČKIH SISTEMA ZA ODRŽAVANJE- sa fokusom na montažu mašinskih konstrukcija i visokoregalnih skladišta, str.513, ilustr.: 25 cm, Bibliografija: str. 497-500; ISBN 978-9958-31-492-6,Tuzla, 2021.; Alagić Ismar, VANJSKOTRGOVINSKO POSLOVANJE sa primjenom u praksi, str. 496, ilustr.: 24 cm, Bibliografija: str. 475-485; bibliografske i druge bilješke uz tekst, ISBN 978-9958-31-493-3, COBISS.BH-ID 45856518, Off-set, Tuzla, 2021.; Alagić Ismar, MONTAŽA I DEMONTAŽA: Tehnike spajanja i tehnološki sistemi u montaži sa primjenom u industriji, 393 str., ilustr.: 25 cm, Bibliografija: str. 371-381, ISBN 978-9958-31-491-9, COBISS.BH-ID 45851142, Off-set, Tuzla, 2021.; Alagić Ismar, OBRNUTO INŽINJERSTVO: Industrijski dizajn i inžinjerska kompjuterska grafika, 448 str., ilustr.: 24 cm, Biografija autora:str.447-448,  Bibliografija: str. 413-416, ISBN 978-9958-31-394-0, COBISS.BH-ID 4582934,  Off-set, Tuzla, 2021.; Alagić Ismar, Priručnik: PROJEKTI I UPRAVLJANJE PROIZVODNJOM (strateški, projektni, proizvodni i konkurentni menadžment, inovativnost, projektantsko promišljanje), 450 str. ,ISBN 978-9958-31-473-5, COBISS.BH-ID 43378694, Off-set, Tuzla,2021.; Alagić Ismar, Tehnologija montaže i demontaže,341 str. : graf. prikazi, tabele ; 25 cm, Biografija autora: str. 307. - Bibliografija: str. 311-324., ISBN 978-9958-617-53-9, COBISS.BH-ID 41739782, Univerzitet u Zenici, Mašinski fakultet, Zenica, 2020.; Alagić Ismar, Upravljanje lancem  vrijednosti – snabdijevanje i logistika, 336 str. : ilustr. ; 24 cm, Bibliografija: str.305-307 ; bibliografske i druge bilješke uz tekst 309-325, ISBN 978-9958-31-441-4, COBISS.BH-ID 29091590,Off-set, Tuzla, 2020.; Alagić Ismar, Priručnik za menadžere u proizvodnji i održavanju tehničkih sistema-lidere budućnosti, 443 str.;ISBN 978-9958-31-435-3, COBISS.BH-ID 28873222,Tuzla, 2020.; Alagić Ismar, PRERADA POLIMERA (injekciono brizganje, tehnologije prerade i spajanja), 270 str. :ilustr. ; 24 cm,ISBN 978-9958-31-433-9, COBISS.BH-ID 28836358, Off-set, Tuzla, 2020.; Alagić Ismar, PODUZETNIČKA INFRASTRUKTURA: više od mjesta za transfer pametnih tehnologija i biznisa za male poduzetnike, 411 str.,ISBN 978-9958-31-407-0, COBISS.BH-ID 27389958, Off-set Tuzla, 2019.; Alagić Ismar, Lokalna uprava i lokalni ekonomski razvoj suočeni sa izazovima koncepata pametni gradovi i industrija 5.0, 298 str.,ISBN 978-9958-34-342-1 COBISS.BH-ID 26594566,  Planjax komerc, Tešanj, 2018.; Alagić Ismar, Industrial Engineering & Maintenance: Lean Production – Six Sigma with application of tools and methods in specific working conditions, 748 stranica:ilustr.25 cm, ISBN 978-9958-074-09-7, COBISS.BH-ID 24232454,2017.; Alagić Ismar, Upravljanje kvalitetom: Lean proizvodnja- Six Sigma, 747 stranica:ilustr.25 cm, ISBN 978-9958-074-08-0, COBISS.BH-ID 24216326, Štamparija S, Tešanj, 2017.; Alagić Ismar, Božičković Siniša, Preduzetnička infrastruktura, 410 str., ISBN 978-99955-36-74-9, COBISS.RS-ID 8161048, Univerzitet u Istočnom Sarajevu, Saobraćajni fakultet u Doboju, Doboj, 2019.; Alagić Ismar, Meškić Zlatan, “Kako poslovati sa Europskom unijom”, 403 str.:, ISBN 992645207-8, COBISS.BH-ID 26629382, Univerzitet u Zenici, Ekonomski fakultet, Zenica,2018.

Title	Alagić Ismar, Lean Six Sigma sa primjenom u praksi, 498 str, : ilustr. ; 25 cm, Biografija autora: str. 457-458., Bibliografija: str. 485-497, ISBN 978-9958-34-601-9. COBISS.BH-ID 47332614, 2022.
Publication Type	Book
Year of Publication	2017
Date Published	August 2017.
Volume	748
Number of Volumes	500
Publication Language	English
Authors	,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,
Publisher	Štamparija-S
Place Published	Tesanj
ISBN Number	ISBN 978-9958-074-09-7
Keywords	Improvement, lean, Methods, Production, Six Sigma
Abstract	Chapter titles: INTRODUCTORY CONSIDERATION DEVELOPMENT OF PHILOSOPHY OF QUALITY AND ACCESS TO QUALITY EVALUATION IN THE AUTOMOTIVE INDUSTRY COMPETITIVENESS IN THE SUPPLY CHAIN AND BENCHMARKING HISTORICAL DEVELOPMENT, TRENDS AND INDICATORS OF CAR INDUSTRY KAIZEN LEAN PRODUCTION SIX SIGMA LEAN SIX SIGMA METHODS FOR STATISTICAL QUALITY MANAGEMENT AND LEAN SIX SIGMA TOOLS INSTEAD OF CONCLUSION After receiving text of this book and after its careful reading and analysis, I conclude the following: 1. This book can be considered monograph. 2. Observed through history, when it comes to production, man is constantly striving for the realization of three important components: To produce the product with the least costs Produce it for as short as possible time and Certainly, to make product of good quality in all aspects of quality. By recognizing aforementioned author Ph.D. Ismar Alagic with this monograph contributed to all of these aspects that have an impact on those components bearing in mind their mutual conflict. The text is offered with special attention to the application of Lean concepts and Six Sigma in the manufacturing processes of production system should enable the achievement of the best possible business results in the current environment. The author rightly states that for all these activities a trader needs to implement the realization of achieving better organization in every aspect of system and process lies in timely decision support and management. 3. Based on the analysis of the chapters in the publication I can state that the text of the book "Lean Manufacturing - Six Sigma" by Ph.D. Ismar Alagic, is one, in the local professional community, of the few texts that in such a comprehensive way handle generally observed quality management of production systems. The enclosed text completely covers the problems of the theory of managing the process of production, based on the concept of Lean and Six Sigma. 4. The author has managed to systematize his twenty years of professional experience (construction quality management system according to ISO 9001: 1994, ISO 9001: 2000 and ISO 9001: 2008) in order to simplify the implementation of this very complex issue and at the same management philosophy. Author gradually, rather systematically and thoroughly, present the production area of system quality with special focus on the automotive industry as well as in these examples of implementation of the Lean concept in the field of wood processing, and wood industry. From this aspect, it is expected that this monograph represent a significant contribution to the successful study of the organizational system of production, and implementation of mentioned concept Lean and Six Sigma. 5. By reading the text of this monograph I can conclude that the author Ph.D. Ismar Alagic invested a great effort, both literary and practical, into researches that he carried out and incorporated in this monograph and as such presented in the text represent the contribution to the development of theoretical and practical thinking in the field of organization of production based on the Lean concepts and Six Sigma reliability of all work processes and their participants with the possibility of its application in solving the current organizational and management problems in economic systems with the aim, among other things, raise competitiveness in this case the production system in BH. 6. Although this is a really complex matter, the author tried with large numbers of comments and examples of good practice to facilitate the reader monitoring and at the same time understanding the problems and benefits that can be expected by proper and systematic use of compliance with all necessary and prescribed steps. I hope that this monograph will be useful to different persons, students, staff in production systems at all levels not only in the areas of automotive and wood industries but beyond. 7. Monograph, in addition to the teaching process, can be used outside the educational process, the educational purposes of practitioners who are faced with the issue of production quality by applying the Lean concept, as global acceptance of the modern approach to production with minimal errors in the work processes.